The New Wolverine Residential Filter Now on Sale Just $34.99

Are you a reseller, dealer or distributor? Create a Wholesale Account | Wholesale Account Login
Basket Contents
Quantity in Basket: none
Recently Visited Items

New at IOC:


 


You Can Purchase Our Products at These Fine Retailers

Customer Service:

Our Phone Number - 866-NO-STINK



Better Business Bureau Reliability Program BBBOnline

Our Privacy Policy


Coal Based Pelletized Activated Carbons

  • Their high activity and surface area make them ideal for most vapor phase applications. The uniformity of their shape makes them particularly attractive in applications where low pressure drop is a consideration.
  • Are all virgin activated carbon.
  • Derived from bituminous coal,
  • They are pelletized in form.

Cost per Pound: $3.00   55 pound Minimum

*Standard packaging is in 55 lb. vinyl bags.
Other packaging is available upon request.
If purchasing adsorption equipment carbon is discounted to $2.50 Per LB

GC C-30: 3 mm Pelletized Activated Carbon

SpecificationsGC-C30

 

Particle Size - (Diameter), mm:

3.0

 

(Length), mm:

4.5

Mean Particle Diameter, mm:

3.75

CCI4Activity, %:

60(min)

Iodine No., mg/g:

1000(min)

Surface Area, m2/g:

1000(min)

Hardness, %:

95(min)

Moisture, % (as packaged):

3(max)

Typical Density, lbs./cu.ft.:

28-32

 

 

g/cc:

0.44-0.50

*Standard packaging is in 55 lb. vinyl bags. Other packaging is available upon request

MSDS Link Buy Now
Use and Care of Activated Carbon
Activated Carbon Principle of Operation

 

  GC C-40: 4 mm Pelletized Activated Carbon


Specifications:

 

Particle Size - (Diameter),mm:

4.0

 

(Length), mm:

6.0

Mean Particle Diameter, mm:

4.7

CCI4 Activity, %:

60(min)

Iodine No., mg/g:

1000(min)

Surface Area, m2/g:

1000(min)

Hardness, %:

95(min)

Moisture, % (as packaged):

3(max)

Typical Density, lbs./cu.ft.:

28-32

 

 

g/cc:

0.44-0.52

*Standard packaging is in 55 lb. vinyl bags. Other packaging is available upon request

MSDS Link Buy Now
Use and Care of Activated Carbon
Activated Carbon Principle of Operation

 

GC A-40:  4 mm Pelletized Activated Carbon


Specifications GC A-40:

 

Particle Size - (Diameter),mm:

4.0

 

(Length), mm:

6.0

Mean Particle Diameter, mm:

4.7

CCI4 Activity, %:

70(min)

Iodine No., mg/g:

1050(min)

Surface Area, m2/g:

1050(min)

Hardness, %:

95(min)

Moisture, % (as packaged):

3(max)

Typical Density, lbs. /cu.ft.

28-31

 

 

g/cc:

0.44-0.50

*Standard packaging is in 55 lb. vinyl bags. Other packaging is available upon request

MSDS Link   Buy Now
Use and Care of Activated Carbon
Activated Carbon Principle of Operation

Activated Carbon Principle Of Operation

Activated Carbon Principles of Operation Printable version

Activated carbon works by the process of adsorption.  Adsorption is when one material adheres to the surface of another material by means of physical and/or chemical attraction between the materials.  Activated carbon is full of holes.  This network of connected pores inside the carbon gives it a large surface area (approx. 1000 sq M per gm of carbon).  Organic odor molecules from the air are attracted to the internal carbon surface. These contaminates accumulate on carbon's interior surface until an equilibrium level is reached between the concentration on the carbon surface and the concentration left in the air.  The lower the residual concentration required in the air stream, the greater the relative amount of carbon required to achieve that level.

The capacity of activated carbon to adsorb a compound depends on several factors including air temperature, the chemicals boiling point, molecular weight, and concentration in the air stream.  The mass transfer zone (MTZ) is the area in the bed where adsorption takes place.  The chemicals concentration and air flow rate change the size of the MTZ.  The lead edge of the MTZ has no contamination in it while the trailing edge is completely saturated (to the level of contamination in the inlet air).  As the MTZ moves through the carbon bed and approaches the end of the bed, breakthrough occurs.  The carbon becomes saturated with adsorbate and the contaminate can be detected in the exhaust.  When the outlet concentration exceeds a specified limit the bed is spent.  The carbon must then be replaced or regenerated.  Samples of the carbon drawn from various levels of the bed can be tested for their remaining capacity and used to predict the remaining bed life.  In this way, bed replacement can be scheduled in advance of the actual need and avoid timing problems.

Activated carbon can be impregnated with chemicals to enhance its ability to control problem contaminates.  Control of acid gases such as Hydrogen Sulfide and Mercaptans is greatly enhanced by impregnation with a caustic compound.  General Carbon IPH carbon is treated with Potassium Hydroxide (KOH) for this purpose.  The KOH gives carbon the ability to chemically neutralize acidic gases and increase the volume of air able to be treated by the carbon.

For applications with high H2S concentrations, bed life can be partially renewed by a process of in site "regeneration".  The procedure soaks the bed in a caustic solution that dissolves accumulated sulfur.  This process is not recommended by Simple Solutions Dist. LLC. because only a limited amount of life can be restored to the carbon.

A better option over Impregnated activated carbons for H2S control is Sulfursorb Catalytic activated carbon.
Sulfursorb is a unique product that is manufactured without the use of chemical impregnation to the surface of the carbon. Sulfursorb was specially developed for the removal of hydrogen sulfide, also known as H2S (the main source of sewer and septic gas odors) (Lou, is there an equivalent page in the pages for our new site?), and other compounds commonly found in municipal odor control applications.

With Sulfursorb Hydrogen sulphide is removed catalytically rather than by chemical adsorption. Because of its catalytic properties Sulfursorb gives you the high loading rates of impregnated carbons without the thermal risks associated with chemically treated carbons (Impregnated carbons). 

This Makes Sulfursorb the perfect choice for use in sewage treatment plants and pumping stations where these compounds are typically found.

The absence of a chemical impregnation means that in certain applications, Sulfursorb can be regenerated* on site with water (instead of hazardous chemicals used with impregnated carbons), thereby re-establishing the active catalytic sites within the internal pore structure.
While Catalytic carbons cost more than standard or impregnated activated carbons, the end result is that it has the adsorbing capabilities of activated carbon without the shorter life and with the benefit of easily being regenerated.


Printable version of sulfursorb information
MSDS Sulfursorb

HDPE24 - HDPE30 - HDPE39 - HDPE42 - HDPE50
Plastic Inflow Protectors - Steel Inflow Protectors - Manhole Filter

The NEW Wolverine Brand Activated Carbon Vent Filter WLV-4 - The NEW Wolverine Brand Activated Carbon Vent Filter WLV-4 by the Case
The Original Wolverine - Super Wolverine - Decorative Filters
Inline Wolverine - 1.5" - Inline Wolverine - 2" - Inline Wolverine 3" - Inline Wolverine 4" - Inline Wolverine 6"
20 LB Mega T Wolverine -30 LB Mega T Wolverine -50 LB Mega T Wolverine
20 LB Mega Wolverine Bucket - The "Little Ugly" - 40 LB Mega Wolverine Barrel - 150 LB Mega Wolverine Polution Control Barrel
Coal-Based Catalytic Activated Carbon - Coal-Based Pelletized Activated Carbon - Coal-Based Impregnated Active Carbon - Coconut Shell Activated Carbon - Ganular Potassium Permanganate
Saturation Indicator - Trocks Hollow Plastic Landscaping Rocks -
Rubber Coupling for Non-PVC Pipes - T-Lift Manhole Cover Lift
 
About our Adsorbers - Retailers/Distributors - Low Flow Quick Application Chart - How to Measure - About the Septic/Sewer Odor You Are Experiencing - Privacy Policy - Links - FAQ - Site Map - Create Account - Log In to Account - Return Polcy - About Us
Patent Pending - Wolverine, Inline Wolverine, Mega Wolverine and Mega "T" Wolverine

Credit Card Logos

Better Business Bureau Logo

Secured by GeoTrust

A Division of

Simple Solutions Distributing Corporate Logo

Simple Solutions Distribution LLC
West Milford, NJ
866-NO-STINK (866-667-8465)
973-846-7817 (Inside NJ)
Email
Our Privacy Policy

Log In To Your Account