Thumbnail Filmstrip of Darco H2S LP Catalytic Activated Carbon for Odor Control - 40 LB Bag Images
|
The Darco H2S LP is nonimpregnated, lignite coal-based, activated carbon that has been specially developed for removing Hydrogen Sulfide and Sulfur compounds from vapor streams. Darco H2S LP is suited for use in sewage treatment plants and pumping stations where these compounds are typically found. Darco H2S LP activated carbon gives you the high loading rates of impregnated carbons without the thermal risks associated with some chemically treated carbons. Also available in 1,000 lb super sacks - Call 973-846-7817 for details and pricing. |
Darco H2S:
- 8 Ways Darco H2S is Better For Odor Control
- Darco H2S VS Calgon IVP
- Grapevine, TX Case Study
- Darco H2S VS Bituminous Coal
- Darco H2S Data Sheet
- Darco H2S MSDS
- A,B,C's of Odor Control
- Activated Carbon Principles of Operation Printable version
Packaging Options: 40LB bags. and 1000LB Super Sack
Darco H2S is a unique product that is manufactured without the use of chemical impregnation to the surface of the carbon. It is specially developed for the removal of hydrogen sulfide, also known as H2S (the main source of sewer and septic gas odors) and other compounds commonly found in municipal odor control applications. With Darco H2S, hydrogen sulphide is removed catalytically rather than by chemical adsorption. Because of its catalytic properties, Darco H2S gives you the high loading rates of impregnated carbons without the thermal risks associated with chemically treated carbons (caustic impregnated carbons). This makes Darco H2S the perfect choice for use in sewage treatment plants and pumping stations where these compounds are typically found.
Darco H2S is an non-impregnated, bituminous coal-based catalytic activated carbon which has been specially developed for removing hydrogen sulfide and sulfur compounds from air streams. It is well suited for use in sewage treatment plants and pumping stations where these compounds are typically found. Darco H2S gives you the high loading rates of impregnated carbons without the thermal risks associated with some chemically treated carbons.
Specifications |
|
| Pellet Diameter, mm: | 3.9-4.1 |
| Moisture, % (as packed) (max): | 5 |
| CTC, %(min): | 20 |
| Hardness, %: | 85(min) |
| Apparent Density, lbs./cu.ft.: | 31-33 |
| g/cc: | 0.50-0.53 |
| Typical hydrogen sulfide breakthrough capacity*, gH2S/cc carbon (min): | 0.20 |
H2S capacity is measured using ASTM standard method D6646-01. Testing requires passing a moist air stream containing 1% by volume H2S though an appropriately sized column (per ASTM requirements) packed with activated carbon and monitoring to a 50 ppmv H2S breakthrough. Results are reported as grams of H2S adsorbed per gram of activated carbon.
*Note: Washing Darco H2S is not recommended in most cases due to the high potential sulfur contents, which can be washed off the carbon. Proper clothing and respirator must be utilized when regenerating carbon with water.
Read Activated Carbon Basics